Nuts and Bolts

The table below gives a listing of all the standard wheel fixings that we recommend. All of the 100+ and Team Dynamics ranges of Light Alloy Wheels are drilled to the specific requirements of these fixings.

We strongly recommend that only Rimstock nuts and bolts are used when securing your wheels.

FIXINGS FOR STANDARD 100+ & TEAM DYNAMICS ALLOY WHEELS
NUTS
PART NO THREAD HEX SEAT TYPE
N 012 1/2" UNF H 19 60 Deg OPEN
N 013 1/2" UNF H 19 60 Deg ACORN
N 050 M12 x 1.5 H 19 60 Deg OPEN
N 051 M12 x 1.5 H 21 60 Deg OPEN
N 052 M12 x 1.25 H 19 60 Deg OPEN
N 053 M12 x 1.25 H 21 60 Deg OPEN
N 054 M12 x 1.5 H 21 60 Deg ACORN
N 055 M12 x 1.25 H 21 60 Deg ACORN
N 058 M12 x 1.5 H 19 60 Deg ACORN
N 059 M12 x 1.25 H 19 60 Deg ACORN
N 065 M12 x 1.5 H 21 60 Deg STAR NUT
N 066 M12 x 1.25 H 21 60 Deg STAR NUT
N 067 M14 x 1.5 H 21 60 Deg STAR NUT
N 068 1/2" UNF H 21 60 Deg STAR NUT
N 069 M12 x 1.75 H 21 60 Deg STAR NUT
N 080 M12 x 1.5 H 17 60 Deg LIGHT ALLOY
N 081 M12 x 1.25 H 17 60 Deg LIGHT ALLOY
N 082 M14 x 1.5 H 19 R 14 LIGHT ALLOY
BOLTS
PART NO THREAD HEX SEAT LENGTH
B105 M12 x 1.25 H 19 60 Deg 28
B106 M12 x 1.25 H 19 60 Deg 46
B110 M12 x 1.25 H 19 60 Deg SLIDE
B111 M12 x 1.25 H 19 60 Deg SLIDE
B112 M12 x 1.5 H 19 60 Deg SLIDE
B121 M12 x 1.5 H 17 60 Deg 28
B122 M12 x 1.5 H 17 R12 28
B123 M12 x 1.5 H 17 60 Deg 25
B126 M12 x 1.5 H 19 60 Deg 25
B127 M12 x 1.5 H 17 60 Deg 45
B129 M12 x 1.5 - 60 Deg 28 STAR BOLT
B136 M12 x 1.75 H 19 60 Deg 27
B145 M14 x 1.5 H 17 60 Deg 28
B146 M14 x 1.5 H 17 R12 27
B147 M14 x 1.5 H 19 60 Deg 30
B148 M14 x 1.5 - 60 Deg 33 STAR BOLT
B149 M14 x 1.5 - 60 Deg 55 STAR BOLT
NUT TIGHTENING SEQUENCE 4 STUD WHEEL
NUT TIGHTENING SEQUENCE 5 STUD WHEEL
IT IS EXTREMELY DANGEROUS TO USE AN INCORRECT FIXING FOR YOUR WHEELS.

IT IS THE RESPONSIBILITY OF THE PERSON FITTING THE WHEELS TO ENSURE THE CORRECT FIXINGS ARE USED AS LISTED IN THIS GUIDE. IF IN DOUBT ASK YOUR DEALER OR CONTACT RIMSTOCK'S TECHNICAL SERVICES DEPARTMENT.

FAILURE TO ADHERE TO THE ABOVE GUIDELINES CAN BE EXTREMELY DANGEROUS
AND WILL INVALIDATE YOUR WARRANTY AND ANY CREDIT REQUESTS.